York YS Especificações Página 16

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 56
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 15
16 JOHNSON CONTROLS
FORM 160.80-EG1 (511)
Condenser – Pressure Transducer Out Of
Range
Auxiliary Safety – Contacts Closed
Discharge – High Temperature
Discharge – Low Temperature
Oil – High Temperature
Oil – Low Differential Pressure
Oil – Low Differential Seal Pressure
Oil Or Condenser Transducer Error
Oil – Clogged Filter
Oil – High Pressure
Oil – Separator – Low Level
Control Panel – Power Failure
Watchdog – Software Reboot
5.1 Safety shutdowns with a Solid State Starter (LCSSS)
include:
Shutdown - Requesting Fault Data...
High Instantaneous Current
High Phase (X) Heatsink Temperature - Run
ning
105% Motor Current Overload
Motor Or Starter – Current Imbalance
Phase (X) Shorted SCR
Open SCR
Phase Rotation
6. Cycling shutdowns enunciated through the display
and the status bar, and consists of system status,
system details, day, time, cause of shutdown, and
type of restart required.
Cycling shutdowns with a fixed speed drive in-
clude:
Multiunit Cycling - Contacts Open
System Cycling - Contacts Open
Control Panel - Power Failure
Leaving Chilled Liquid – Low Temperature
Leaving Chilled Liquid – Flow Switch Open
Condenser - Flow Switch Open
Motor Controller – Contacts Open
Motor Controller – Loss Of Current
Power Fault
Control Panel – Schedule
6.1 Cycling shutdowns with a Solid State Starter (LCSSS)
include:
Initialization Failed
Serial Communications
Requesting Fault Data
Stop Contacts Open
Power Fault
Low Phase (X) Temperature Sensor
Run Signal
Invalid Current Scale Selection
Phase Locked Loop
Low Supply Line Voltage
High Supply Line Voltage
Logic Board Processor
Logic Board Power Supply
Phase Loss
7. Security access to prevent unauthorized change of
setpoints, to permit local or remote control of the
chiller, and to allow manual operation of the prerota-
tion vanes and oil pump. Access is through ID and
password recognition, which is dened by three
different levels of user competence: view, operator,
and service.
8. Trending data with the ability to customize points of
once every second to once every hour. The panel
will trend up to 6 different parameters from a list of
over 140, without the need of an external monitoring
system.
9. The operating program is stored in non-volatile
memory (EPROM) to eliminate reprogramming the
chiller due to AC power failure or battery discharge.
Programmed setpoints are retained in lithium bat-
tery-backed RTC memory for a minimum of 11 years
with power removed from the system.
10. A fused connection through a transformer in the
compressor motor starter to provide individual
over-current protected power for all controls.
11. A numbered terminal strip for all required eld inter-
lock wiring.
12. An RS-232 port to output all system operating data,
shutdown/cycling message, and a record of the last 10
cycling or safety shutdowns to a eld-supplied printer.
Data logs to a printer at a set programmable
interval. This data can be pre-prograrnmed to print
from 1 minute to 1 day.
13. The capability to interface with a building automation
system to provide:
remote chiller start and stop
remote leaving chilled liquid temperature adjust
remote current limit setpoint adjust
remote ready to start contacts
Mechanical Specications - continued
Vista de página 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Comentários a estes Manuais

Sem comentários

Philips QG3250/32 podręczniki

Instrukcje obsługi i podręczniki użytkownika dla Zdrowie i higiena Philips QG3250/32.
Dostarczamy 2 pdf podręczników Philips QG3250/32 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika






Więcej produktów i instrukcji dla Zdrowie i higiena Philips

Modele Rodzaj dokumentu
HQ177-42 Instrukcja Użytkownika   Philips HQ177-42 User Manual, 2 strony
QT4010-40 Instrukcja Użytkownika   Philips QT4010-40 User Manual, 7 strony
BG2030-60 Instrukcja Użytkownika   Philips BG2030-60 User Manual, 11 strony
HP6512-50 Instrukcja Użytkownika   Philips HP6512-50 User Manual, 8 strony
NT8110-10 Instrukcja Użytkownika   Philips NT8110-10 User Manual, 6 strony
Norelco Multigroom 3300 Series 3000 grooming kit Q Instrukcja Użytkownika   Philips Norelco Multigroom 3300 Series 3000 grooming kit QG3331-42 6 tools for all-in-one styling 18 built-in length settings 35mins cordless use-10h charge Hair clipper attachment User Manual, 2 strony
AT790-40 Instrukcja Użytkownika   Philips AT790-40 User Manual, 3 strony
QG3270-32 Instrukcja Użytkownika   Philips QG3270-32 User Manual, 4 strony
BT5275-41 Instrukcja Użytkownika   Philips BT5275-41 User Manual, 2 strony
QG3280-41 Instrukcja Użytkownika   Philips QG3280-41 User Manual, 15 strony
QC5550-40 Instrukcja Użytkownika   Philips QC5550-40 User Manual, 13 strony
QC5510-65 Instrukcja Użytkownika   Philips QC5510-65 User Manual, 8 strony
Norelco Do-It-Yourself clipper DIY cordless hair c Instrukcja Użytkownika   Philips Norelco Do-It-Yourself clipper DIY cordless hair clipper QC5580-40 Easy Reach 180° rotating head 14 built-in length settings 60mins cordless use-1h charge Head shave attachment User Manual, 2 strony
BG2020-31 Instrukcja Użytkownika   Philips BG2020-31 User Manual, 10 strony
HP6576-60 Instrukcja Użytkownika   Philips HP6576-60 User Manual, 9 strony
Norelco Bodygroom 5100 Series 5000 wet & dry b Instrukcja Użytkownika   Philips Norelco Bodygroom 5100 Series 5000 wet & dry body groomer BG2038 Safe self-sharpening blades 3 combs 3 length settings 50mins cordless use-1h charge Back attachment User Manual, 2 strony
G390-60 Instrukcja Użytkownika   Philips G390-60 User Manual, 14 strony
QC5560-40 Instrukcja Użytkownika   Philips QC5560-40 User Manual, 2 strony
Hair clipper pro QC5350-80 With contour following Instrukcja Użytkownika   Philips Hair clipper pro QC5350-80 With contour following comb User Manual, 9 strony
QG3380-42 Instrukcja Użytkownika   Philips QG3380-42 User Manual, 4 strony